nailing siphon carbonation I

(Putting a preemptive ‘I’ on this, because I still don’t feel like I’ve totally nailed it.)

Almost every bar I’ve ever worked in has had a housemade ginger beer. The recipes have varied, but the one thing they all had in common was that they were dispensed through a siphon. Pouring out a glass, they never really maintained a stable carbonation though. All I ever seemed to get was a giant glass of foam, and waiting for it to settle took about as long as pouring a warm diet coke (ugh, whyyy). Afterward there never really seem to be many bubbles rising upwards. Eventually I learnt that carbonating a liquid in a siphon and then opening the canister to pour the liquid out gently instead of using the dispense nozzle reduced the loss of carbonation. (Personally I like using a cream siphon, because the opening is much larger and you can release the excess gas/increase the pressure inside, without losing any liquid. Not entirely sure, but I have this funny feeling that the companies that make the siphons would warn against using CO2 in a siphon designed for N2O, and vice versa, so consider this a disclaimer..). So I’m in territory now where I’m carbonating and bottling on a small scale and things are still fizzy for real, which is pretty exciting. Like actual soda. There are a few concepts that have helped me once I got my head around them.

Why the soda loses carbonation when it’s squirted from the dispense nozzle: agitation. Squirting the soda from the siphon agitates the liquid and lets the CO2 escape from the liquid much faster. Pouring gently gives it less opportunity to break the surface tension of the liquid. (Scientific American)

Why does cream taste sour when you accidentally charge it with CO2 instead of N2O: dilute carbonic acid. When you charge water (H2O) with soda cartridge (CO2) they bond to form H2CO3 (carbonic acid). Basically, carbonic acid is the name for carbon dioxide that has dissolved into water, and it’s an acid, so it tastes sour. (N2O is more stable and mixing it into water or cream doesn’t create new molecules. In thick substances, like cream, it just gets trapped in there and hangs out. In thin substances, like water, it doesn’t get trapped, so no gas bubbles stick around.) (Seasoned Advice)

Why does soda carbonate better when it’s cold: Le Chatelier’s Principle. Here we’re getting a bit beyond the limits of my scientific education, but as I understand it, Le Chatelier’s Principle is about maintaining equilibrium. So if you apply a stress to one part of system, the system will adapt to balance it. Lowering the temperature and increasing pressure are stresses that increase the saturation point of the liquid and the solubility of the CO2. They encourage the CO2 to dissolve into the liquid. (I’m still reading about this principle, because I’d really like to compare it to something like making a saline solution/brine or sugar syrup. Saturation points make sense to me in those circumstances, because increasing the temperature of the water increases the amount of salt or sugar that you can dissolve into it…)

One more link, and the best of them all… (Carbonating at Home)

 

accidental discovery: walnuts can make things purple?

So I’ve made this recipe belonging to a buddy of mine about five times without any anomalies and consistent flavour. It’s a simple method using an immersion blender, comes up a creamy golden brown, with a little separation continuing after a cloth-straining (no big deal as it’s blitzed into a creamy drink). It’s walnuts, honey, vanilla, water.

Out of nowhere this week, and originally to my absolute horror, as I began blending the walnuts into the honey it began to turn purple… and then black. What the hell had I done? What new element had I introduced? It was practically inky and the foam on top was cement grey-purple.

Turns out this is one the coolest accidents to come my way. It was an acid that is commonly found in the skins of walnuts, called gallic acid. After a bit of google searching I ended up on baking and beekeeping forums, and the wikipedia page of an ink used between the 15th-19th centuries, and this is what I’ve got:

  • A problem for bakers is having their walnut breads turn purple because of gallic acids found in the skin.
  • A highly sought after and quite rare type of honey that occurs naturally is dark purple. Many apiarists believe this is because of high acidity in the soil in the vicinity of hives.
  • Iron gall ink was prepared using iron salts and tannic acids from oak gall nuts (where the name for gallic acid is derived.) A well prepared iron gall ink would gradually darken on the paper to a dark purple colour.

I totally triggered a chemical reaction accidentally. Perhaps the honey contained something that interacted with the walnuts? Maybe I didn’t bring the water entirely to the boil?

Now where do I find this actually purple honey, though?

using acid to clarify homemade orgeats

For a while I was looking for a method to get my pistachio syrup stable, be it cloudy or clear, without using metres of muslin cloth. (pistachio syrup with xanthan). I actually solved this a little while back and after making it a few times have pretty much nailed down an easy method.

The recipe I was using had a splash of unexplained vinegar in it. For most of the time I have been making it I assumed it must have been included as a preservative measure, as with shrubs, as there was no mention of it in the recipes method. One day however, as I was melting sugar into my pistachio milk on the stove, I noticed a thick skin forming on the top of the liquid, and I began to skim it off, as you might while clarifying butter. So many things clicked in my brain at the same time (citric acid in cheesemaking, alternative milks like soy and almond curdling in hot coffee) and that unexplained splash of vinegar suddenly made sense.

Now I bring that stuff to the boil, stand over it at a simmer with a large flat spoon, and skim as much of that gunk from the surface as I can, and then it’s just one pass through few layers of muslin for a perfectly clear syrup. I wouldn’t necessarily use vinegar in every orgeat recipe I made. In this recipe it works because the pistachio syrup is used in combination with a shrub that also contains the same type of vinegar, so the distinctive flavour is balanced in the final drink. It’s definitely worth looking into how small an amount of acid you can add to encourage it to curdle, to reduce the chances of altering the flavour.

concept development

I’ve been reading a lot lately about chefs and bartenders who develop recipes by seeking inspiration from other creative spheres. I stumbled across this blog post today, (Meadowlark). The writer spent some time creating a drink to match an album by Sufjan Stevens. The drink was fairly simple, but I was immediately struck by the depth of research that went into creating it. She spent time looking at the artist’s inspiration, and used that to inform her own creation. Each ingredient was reasoned, and the recipe read well because of it. (btw, I noticed that huge amount of rosewater too, but in an earlier post she has a recipe for ‘rose water’ which is actually more of a petal tisane, which would definitely work at that volume.)

In this article from last month on Punch, Drew Lazor explores different approaches to concept development (How To Develop a Concept Cocktail). I’m smitten with Chantal Tseng’s ‘limited edition’ menus at The Reading Room, in Washington D.C, that revolve around the book she’s reading that week. She uses narrative, geography, characters, and the author’s persona to inspire her ingredients.

Cerebral stuff isn’t necessarily the way to go every time, but I’ve always found that the best names and recipes (of my own) are always tightly knit together by a solid concept that drew inspiration from a clear source.

A recent recipe comes from, at first, a pretty vague space that slowly developed into a combination of dew drops on winter green, Fern Gully, the flavours I associate with the word “nectar”, and how sweet and clean I imagine this water tastes to this little guy:

dewdrop
I truly believe it would definitely taste like Dolin Blanc

The idea hung about in my head and in a few variations for about a six months. By the time I got around to making it, I’d spent so long messing with the concept and had such a clear idea of how I wanted it to taste that it took less than 20 minutes to nail down a recipe. The drink ended up as a light, clean, carbonated thing with a hint of sweetness that is balanced with tartaric and malic acids to give the impression of a sparkling wine.

Who knows if people are going to taste the idea of a fairy with a dewdrop cupped between their tiny, webbed fingers. I doubt it, and I’m not going to tell them that they have to. I’d be delighted to hear that someone has drawn that conclusion independently, but it doesn’t really matter. What matters is that having a concise and well developed concept helped to develop a good recipe.

 

the origins of fat-washing

Read this excellent run down of fat-washing on Serious Eats. I refer to it often, as my knowledge develops, and the more scientific elements the author discusses make more sense to me each time. The best thing to me though, is the discovery that the origins of fat-washing lie in an antiquated perfume extracting technique called enfleurage. There are two types of enfleurage: cold and hot. They’re used to infuse odourless and flavourless animal or vegetable fats with the scents of flowers like jasmine or tuberose that are too delicate for other infusions. In cold enfleurage that fat is spread out in a flat tray and the fresh petals are pressed into the fat. They are left to infuse, and once spent, are replaced with a fresh batch a few times. Once the fat is saturated with the scent, it is washed with neutral alcohol to extract those essential oils. This article on Punch  mentions a peanut butter infused spirit where the creator used this second step of the cold enfleurage method to extract the flavour. Hot enfleurage is faster and good for scents like lavender and rose. The flowers are submerged in hot oil and like with cold, they are spent and replaced a few times, and then the oil is washed with alcohol. I asked a perfumer what kind of oil she used for infusion and she recommended safflower.

I’m hoping that I can use this technique to make my own perfumed fat-washed alcohol. So it might carry some of the silky texture, but mostly it will be far more to create a more aromatic spirit. Like maybe cognac pumped up with rose.

tactile experience: szechuan pepper

I’ve been thinking more and more about how important the feel of a drink is. I’m talking literally texturally. I’ve been coming at the idea from a few different directions for a while now, and have just realised that in all cases I’ve been playing with the same concept of messing with the sense of touch.

Most recently I started thinking about if there was a way to make something tickle a little, or give the impression of actual movement beyond carbonation bubbles, and I stumbled across an article about an experiment with Szechuan pepper. Szechuan pepper has a little guy in it called (hydroxyl alpha) sanshool which actually produces a tingling sensation akin to vibration. Apparently this vibration (measured in studies at a frequency of 50.0 Hz: Science20) can give your tongue and lips the impression that a drink of still water is actually fizzy.
This suggestion got me pretty excited, because I have been mulling over some ideas for a drink or drink/food pairing for a while, that might trick you into thinking a still drink was carbonated. Perhaps there is a sound track of the very light, tickling crackling sound of teeny bubbles, or the food, a dust on the rim of the glass or a mousse (emulating carbonation foam) on the top has something like pop rocks in it. Sanshool might solve this! So how to infuse/extract it? Can I find it in foods other than Szechuan pepper?

creative vs commercial production

One of the things I enjoy most at work is the act of translating a small scale experimental recipe into something that makes sense on a high volume menu. Often when someone brings a syrup or infusion recipe to me it’s something they have made in small batches to workshop the recipe until they can achieve desired proportions. Sometimes that means that the methods originally used are a little unwieldy, and it’s quite interesting to figure out how to adjust it into something that makes sense in terms of time and money, while still retaining the right flavours and the intentions of the person who created it. If something takes hours of work and multiple pieces of equipment to produce, then it’s unlikely to sit well amongst a large cocktail menu, no matter how delicious it is. It also means that it may be hard to reproduce the same flavour consistently when there are so many variables at play.

Some inconsistencies are truly beautiful things. The way a fruit changes throughout its season, and the different flavours you can find between hard to distinguish species is so interesting, but unless you’re willing to make that difference a staple on your menu, then sometimes it’s just not going to work for you. I recently developed a recipe that required fresh peaches, and I know that this may be a problem in the long term. I’ve done my best to specify between species as I know that white peaches show a more consistent, although less rich, flavour profile through their season and ripening stages than yellow peaches, but what happens when their season ends? I’m going to need to develop an alternative method to keep that drink on the menu. If I can find a high quality peach nectar to mix then I may be on the right track, (a puree probably won’t work in this circumstance), and then I will also cut down on techniques and save on production time. I just have to force myself to let go of the fresh fruit, trust that someone else out there knows what they’re doing, and let them handle a small part of my recipe for me. I’ll call it outsourcing.

foams, airs, mousses: part 2

Soy lecithin has proven to be an overwhelming success for my purposes, although now I would like to experiment with how the starting texture, density and acidity of the liquid impacts the size of the bubbles and the ratio of lecithin required.

The drink I am working on is the first of a five course degustation. The foam is a very strong, sweetened hibiscus tea, or tisane really, that will be layered extravagantly over the top of a punch bowl. The punch itself, (peach & fenugreek syrup, white wine vinegar, Star of Bombay Gin, and still water), is a very pale yellow-pink, so the bright pink foam will slowly seep into the drink and colour it. The levels of sweetness need a little tweaking, and a more solid concept of how much foam I would need to produce per serve is required too.

Out of curiosity, I first made a foam with a whole egg white (approx 40mL) and 200mL of the tea, although the foam held excellently, it was far too dense for my purposes. I then made the foam with soy lecithin powder, using 1g to 200mL of tea (a proportion of 0.5%). Pictured below are the foams at least 30 minutes after making. Egg white is on the left and lecithin on the right. At the bottom the two punch glasses show the look of the foam after it’s been in a drinkers hands for a while, again egg white on the left and lecithin on the right. The soy lecithin foam is so much prettier, while the egg white foam has grown clumpy and dry.

 

egg white (L) vs soy lecithin (R) foams

 

I get the idea that perhaps the more acidic a liquid is, the less lecithin is required? The chef tells me he uses just 1g of lecithin to 1000mL liquid to make a foam using vinegar, and he creates large bubbles in that air, so perhaps in my sweetened, low acidity liquid, I can push the proportion of lecithin much higher to achieve the same results. I have more to research, I guess.

foams, airs, mousses

When you consider texture in drinks that often only extends to the viscosity of the drink as a whole, often in relation to dilution or the desired impact of the flavours. The light astringency of citrus or other acids is great for palate cleansing aperitif style drinks, and the rich tongue-coating effect of chilled gin or vodka is somehow syrup-like and refreshing at the same time. We use foams all the time in sours and fizzes with egg white, but I want to go a step further, and make that layer of foam a separate flavour. I’d seen chefs using coarse foams on dishes, and the last few iterations of the menu at work have included a drink or two topped with a dense, egg white based, flavoured mousse.

Recently, talking with my workmate, Jimmy, we were pondering how to incorporate the sweet distinctive flavour of cola into a cocktail without it immediately dominating the drink. He suggested a flavoured foam, of the style we already used (the dense, egg white based mousse), and it got me thinking about the huge volumes of effervescent fluff you create when you first open and pour a room temperature bottle of carbonated soft drink. It’s even better if you’re pouring the room temperature drink over ice. The fast temperature change must shock it into foaming up even more. In my experience Diet Coke is best/worst for it. (Waiting for your mixer to settle when it’s busy is the worst.) So. what if the foam was actually that light, aerated froth rather than something dense and almost creamy, and how was I going to get it to keep its form for longer than a few minutes?

Peering over shoulders in kitchens had informed me that the creation of a flavoured, beer-head style froth was a pretty common technique, so I turned my research to culinary foams, which has been enlightening. There are wet foams and dry foams, coarse foams and airs with large bubbles, and dense mousses with tightly beaded and bonded bubbles. I even learnt that bread is a “set foam”, which actually makes a lot of sense coz when you look at slice of bread its whole structure is a network of bubbles. I’ve seen Lecithin powder amongst the modern ingredients of the top shelf in the kitchen, so tomorrow, armed with the very handy digital scales, I’m going to attempt a flavoured, (and coloured), coarse foam/air.

So far I know:

-Soy Lecithin is a commonly used stabiliser and emulsifier, which can be used to replace the lecithin that naturally occurs in things like egg yolk.
-The liquid I’m trying to foam will need to be very strong, because I’m going to be diluting it so much with air.
-I should be trying to add by weight at a volume of 0.3%-1% of the total liquid, depending on what I’m trying to foam. A recipe for a citrus foam that I’ve found uses something close to 0.6% of total volume, but I was planning on my foam being made from a starting liquid that was a little denser, so I’m not sure how that will impact it yet.
-I need to mix the foam in a low flat container with something like a stick blender, to allow as much air interaction and incorporation as possible.

More on this later.

sound is important to your perception of flavour

Things taste different in planes to on the ground so when a chef curates an inflight menu, or a sommelier writes a wine list for an airline, they have to consider this as they select ingredients and flavour profiles. The altitude, background noise and dried nasal passages alters the way you interact with flavours. Salt perception is reduced, for example, but umami is enhanced. Apparently tomatoes taste amazing because of this, and in hindsight I think of all the very sad looking slices of “fresh” tomato that I have pushed aside on inflight meals. What if I was missing out on something amazing.

Studies have found that sound contributes immensely to our perception of flavour, with my favourite being the 2007 University of Leeds study (called “Bacon: the slice of life” omg) which was conducted to quantify just how important the crispiness of bacon is to the perfect BLT. This kinda thing is pretty common in commercial food science which I imagine often results in “new & improved” products on the regular. This Flavour Journal article references a Magnum icecream improvement that went wrong when they accidentally altered the way the chocolate coating cracks as you bite into it.

And then there’s ambient noise, like music. Studies have proven that music played at higher decibels influences people to perform activities faster, drinking in particular (ScienceDaily), which is a pretty neat trick that a lot of fast moving venues employ, but something that potentially inhibits your perception of the food and drink you’re consuming there. (Maybe that’s why some restaurants choose not to play any music at all?) There’s also evidence that that background music could be altering your palate too. Low pitched tones focus our palate on bitter flavours and high tones bring out sweeter flavours. You can test it out on yourself here: high pitch, low pitch. Apparently something like coffee or dark chocolate is a great thing to try it out with as it has distinctive sweet and bitter notes.